Place of Origin:
HT-Industrial Diaphragm Pump
No Contamination Industrial Diaphragm Pump Pneumatic Good Self-Priming Performance
Pneumatic Industrial Diaphragm Pump Introduction
Industrial pneumatic diaphragm pump is a kind of pump equipment that uses the principle of pneumatic drive to act on the diaphragm on both sides of the pump body through alternating pneumatic power, so that the liquid is continuously sucked and discharged inside the pump body. It has the advantages of simple structure, wear resistance, not easy to leak, suitable for various viscosities and corrosive liquids, dry running, high self-priming range, etc. It is widely used in chemical industry, environmental protection, food, pharmaceutical, printing and dyeing, coating, petroleum , liquefied gas and other fields.
Pneumatic Industrial Diaphragm Pump Scope Of Application
Pneumatic Industrial Diaphragm Pump Advantages
Versatility: Pneumatic diaphragm pumps can handle a wide range of fluids, including abrasive, viscous, and corrosive liquids, as well as slurries and fluids containing solids.
Self-priming: Pneumatic diaphragm pumps are self-priming, which means they can start pumping without the need for manual priming.
Dry running: Pneumatic diaphragm pumps can run dry without causing damage to the pump.
Solids handling: Pneumatic diaphragm pumps can handle fluids with high solids content, making them suitable for applications such as wastewater treatment.
Easy maintenance: Pneumatic diaphragm pumps have a simple design and few moving parts, making them easy to maintain and repair.
Safe operation: Pneumatic diaphragm pumps are safe to operate because they are powered by compressed air, which eliminates the risk of electric shock.
Energy efficient: Pneumatic diaphragm pumps are energy efficient because they use compressed air as the power source, which is often readily available in industrial settings.
Pneumatic Industrial Diaphragm Pump Performance Parameter Table
|No Contamination Industrial Diaphragm Pump Pneumatic Good Self-Priming Performance
|Up to 1000 L/min
|Up to 8.6 MPa
|Up to 10 mm
|Air inlet size
|1/4 inch NPT
|Fluid inlet/outlet size
|1 inch NPT
|Up to 120°C
|Up to 50000 cps
|Aluminum, Stainless Steel, PTFE, Santoprene
|Air supply pressure
|1.4 - 8.6 bar
|0.4 - 1.2 m³/min
|Up to 9 m
|70 - 75 dB(A)
|Self-priming, dry running, no seals, low pulsation
|Chemical transfer, paint circulation, ink transfer, wastewater treatment, food processing
Huatao Supply The Spare Parts For All Kinds of Pump
Huatao Pumps Application
Huatao Pumps Package, Shipment, Workshop
Exhibition And Customer Visting
Please ask for pump details and price by email@example.com, Whatsapp: 0086 137 0329 5214.
For any questions will reply within 24 hours.
Send your inquiry directly to us