Place of Origin:
China
Brand Name:
HUATAO
Certification:
CE
Model Number:
S
Contact Us
Video
Alternative Andritz Centrifugal Paper Pumps for Pulp production
Structure
It is a single-stage single-suction cantilever structure, mainly composed of pump body, impeller, pump cover, wear-resistant plate and cantilever frame components;
2. From the motor end, the motor rotates clockwise, and the pump is axially sucked and radially (middle) discharged;
3. The pump is a rear-opening structure, and the inlet and outlet pipes do not need to be disassembled during maintenance;
4. The pump shaft is supported by two high-precision rolling bearings and is lubricated with thin oil (20# engine oil);
5. The vehicle seal adopts two types of mechanical seals or packing;
6. The gap between the wear-resistant plate and the front side of the impeller can be adjusted by adjusting the screw to maintain the high efficiency of the continuous operation of the impeller;
7. The pump and the motor are directly connected by a pin coupling
Andritz S slurry pump parameter table
| Model | S |
| Flow rate | 4000m3/h |
| Head | Up to 140m |
| Pump casing pressure | Up to 1.6Mpa |
| Temperature | Up to 140°C |
| Concentration | Up to 6% |
| Impeller | Open impeller design |
| Seal options | Single mechanical seal, Cartridge double mechanical seal |
Design features:
This series of pumps also features a modular system, and its standard parts can be used with other pump types, further improving its applicability and flexibility.
The design of the ANDRITZ S series centrifugal pumps also pays special attention to wear resistance and durability. The pump body and pump cover are protected by two wear-resistant liners, and the sturdy shaft ensures minimum shaft deviation and low vibration, thus ensuring the long life and low maintenance requirements of the pump.
The entire series uses only a few different sizes of bearing frames, providing a reliable open impeller design, which is characterized by low axial force and is suitable for conveying a variety of different media.
In terms of the sealing system, the ANDRITZ S series centrifugal pumps provide a variety of sealing options, including single mechanical seals that do not require external sealing water and containerized double mechanical seals that require external sealing water, etc., to meet the needs of different working conditions.
Andritz S pulp pumps and pump spare parts field applications:
ANDRITZ S series centrifugal pumps are widely used to transport clean and solid particles, demonstrating their superior performance in efficiency, service life, easy maintenance and economic benefits, and can meet the requirements of high-end customers.
Display
Send your inquiry directly to us
