Place of Origin:
China
Brand Name:
HUATAO
Certification:
ISO9001
Model Number:
HT- Hydraulic Pump
Contact Us
The function of the plunger pump is mainly to convert the external input mechanical energy into energy that increases the pressure through the prime mover. It can transmit the energy to the hydraulic system in the form of pressure or flow. Since the plunger pump can transport liquid under high pressure, it is widely used in oil exploration and development, catalytic reactions in petrochemical industry, liquid chromatography analysis, supercritical extraction, separation, atomic energy science, environmental science, process equipment, experimental equipment and micro-transmission of various liquids.
Features of Plunger Pumps
As the discharge pressure in the pump rises, leakage loss also increases; however, the actual flow rate decreases only slightly.
The pump is suitable for a wide range of pressures, high viscosities, and a narrow flow range.
With increasing discharge pressure, shaft power rises, leading to improved pump efficiency.
The plunger has a low number of reciprocating cycles, resulting in pulsations, while maintaining a constant average flow rate and good suction capacity.
There is relative motion among friction components.
The pump operates with high efficiency, requiring minimal power, and contributes to energy savings.
Application of plunger pump
The main function of plunger pump is to convert the mechanical energy input from the outside into energy that increases pressure through the prime mover. It can transmit energy to the hydraulic system in the form of pressure or flow. Since plunger pump can transport liquid under high pressure, it is widely used in oil exploration and development, catalytic reaction of petrochemical industry, liquid chromatography analysis, supercritical extraction, separation, atomic energy science, environmental science, process equipment, experimental equipment and micro-liquid delivery of various liquids.
| MODEL |
A4VG56DA1D |
| FLOW PER TURN ml |
0.05 |
| SPEED rpm |
5-300 |
| FLOW ACCURACY |
士1% |
| MAX PRESSURE kpa |
150 |
| LIQUID TEMPERATURE RAGE ·C |
0-40 |
| CLEANING LIQUID OF TEMPERATURE RANGE |
0-95 |
| MOTOR |
2phase |
| OUTLINE SIZE mm |
56×56×150 |
Send your inquiry directly to us
